Custom Plastic Transfer Plates
Plastic transfer plates guide, support, or separate components in conveyors, assembly lines, and fluid-handling equipment. They are machined from sheet or block stock rather than molded, so thickness, hole patterns, and edge profiles can change without tooling costs.
- Thickness
- 3–150 mm
- Tolerance
- ±0.1 mm
- Lead Time
- 7–12 days
CNC Operations Used for Transfer Plates
Operations are sequenced on the same setup where possible to keep features aligned.
Milling
Creates flat surfaces and pockets across the plate face.
Turning
Produces circular or cylindrical features on plate edges or mounting bosses.
Drilling & Tapping
Adds mounting holes and threaded inserts.
Slotting & Contouring
Forms channels or irregular outlines for clearance and routing.
Manufacturing Capacity for Transfer Plates
PlasticCNCPro machines transfer plates from 3 mm to 150 mm thick in sizes up to 1200 × 600 mm. Standard tolerances are ±0.1 mm on overall dimensions and ±0.05 mm on hole positions. Tighter tolerances down to ±0.02 mm are available on critical locating surfaces after discussion of inspection methods.
| Parameter | Standard Range | Available on Request |
|---|---|---|
| Thickness | 3–150 mm | Up to 200 mm |
| Length / Width | Up to 1200 × 600 mm | Larger formats on review |
| Hole position tolerance | ±0.05 mm | ±0.02 mm |
| Flatness | 0.1 mm per 300 mm | 0.05 mm per 300 mm |
| Surface finish | 1.6 µm Ra | 0.8 µm Ra or polished |
| Lead time (prototypes) | 7–12 working days | Expedited options |
Parts are supplied with deburred edges and protective film unless packaging instructions specify otherwise.
Materials Commonly Selected
Material selection begins with the operating temperature, load, and any regulatory requirements stated in the inquiry.
POM
Low friction and good dimensional stability for sliding applications.
UHMW-PE
Wear resistance in abrasive environments.
PEEK (filled grades)
Retains properties at elevated temperatures and resists processing-line chemicals.
PPS (filled grades)
Chemical resistance and thermal stability for demanding lines.
Typical Projects
Buyers request transfer plates for new machine builds, replacement of worn metal parts, or low-volume runs where injection molding is not economical. Prototypes are produced first to confirm fit before repeat orders.
Common Modifications
- Custom hole patterns for sensor mounting
- Slots for belt clearance
- Chamfered edges to reduce part hang-up
New Builds
Plates engineered to drawing for first-time machine assembly.
Replacements
Polymer alternatives for worn metal components.
Low Volume
Runs where injection molding is not economical.
Prototyping
First articles to confirm fit before repeat orders.
Next Step for Your Project
Send the drawing or 3D file, required material, quantity, and any special packaging or marking instructions. A quotation with lead time and material recommendations follows within two working days.
Email: info@plasticcncpro.com
PlasticCNCPro is located at 29 Fuxing Road, Dongguan City, Guangdong Province, China.